-
Recorded on April 10th, 2025 Description: Peri-implantitis has been receiving attention following recent studies that showed that it is highly prevalent and difficult to manage. This lecture will provide the latest evidence-based information on peri-implant diseases with emphasis on the role that titanium particle release has in destructive bone inflammation around implants. Strategies for prevention and mitigation will be presented through clinical cases. Upon completion of this presentation, participants should be able to: 1) Identify explicit methods of peri-implant evaluation. 2) Explain the role of titanium particles around implants. 3) Discuss the etiology of peri-implantitis. Georgios Kotsakis, DDS, MS Dr. George Kotsakis is a Professor & Assistant Dean for Clinical Research at the Rutgers School of Dental Medicine. He is a dual trained clinician scientist and Board Certified Periodontist. At Rutgers he is the Director of Research leading the NIH-funded Clinical Research Center conducting research on the biological mechanisms underlying peri-implant bone loss and developing novel treatments for dental and biomedical implants. Dr. Kotsakis has published over 100 peer-reviewed scientific articles and textbook chapters with more than 30,000 citations of his work. He is one of the few Dental researchers to have been published in prestigious medical publications, such as the Lancet and PNAS. He has been the recipient of multiple career and research awards from the American Academy of Periodontology, the Academy of Periodontology Foundation and other organizations. Additionally, he serves as an Associate Editor for the Journal of Periodontology and CIDRR. Dr. Kotsakis has indicated the following relevant financial relationships to disclose: Speaker and received honoraria: Osteogenics, Novabone Received honoraria: Datum Dental Performed research: Osteogenics, Novabone, Datum Dental, Dentsply, MIS, Stellalife, ITI, Waterpik -
Recorded on May 1st, 2025 Description: Indications for application of total temporomandibular joint replacement (TJR) and maxillomandibular advancement (MMA) are multifaceted and vary from case to case, and it is imperative for the clinician to understand all the contemporary approaches and literature when considering the appropriate treatment for airway disorders, obstructive sleep apnea (OSA) , TMD, craniofacial deformities and trauma. The proper diagnosis must be supported by the necessary studies, including TMJ MRI, CBCT, polysomnography, and clinical findings. The correct option and timing of surgery is paramount to the long-term success of each case. Tailored treatment planning will be discussed in conjunction with cutting edge digital workflow to increase success and predictability of surgical and stable orthodontic outcomes. Upon completion of this presentation, participants should be able to: 1) Explain the various TMJ pathologies requiring TJR. 2) Describe when to use TJR to ensure the most stable biomechanical outcomes. 3) Recognize the available methodologies including clinical assessment, CT scan, and MRI for utilizing TJR as part of the ortho-surgical treatment. Reza Movahed, DMD Dr. Reza Movahed is an Oral and Maxillofacial Surgeon in private practice serving the greater St. Louis region, San Francisco Bay area, and patients from across the country. His private practice, Movahed OMS, concentrates on treating patients with dentofacial deformities and obstructive sleep apnea requiring corrective jaw surgery, temporomandibular joint surgery, and combined orthognathic and TMJ surgery. After receiving his Doctorate in Dental Medicine from the University of Medicine and Dentistry of New Jersey, he completed his residency program at Nova Southeastern University, and a fellowship specializing in TMJ and corrective jaw surgery to manage dentofacial deformities. Dr. Movahed is a Clinical Assistant Professor at the Saint Louis University, Department of Orthodontics, where he lectures on surgical orthodontics and takes part in multidisciplinary ortho-surgical cases with residents. He has written multiple chapters for books concentrating in OSA, joint and corrective jaw surgery, numerous scientific articles, and is the coauthor of a textbook which focuses on treatments for sleep apnea. In his spare time, he is a painter and musician. Dr. Movahed has indicated he has no relevant financial relationships to disclose.Relevant literature for further information:
Movahed, Reza, AND Semensohn, Ryan. “Indications for alloplastic total joint replacement in obstructive sleep apnea patients requiring maxillomandibular advancement” Frontiers of Oral and Maxillofacial Medicine [Online], Volume 5(16 February 2023) Al-Moraissi , E.A. , Wolford , L.M. , 2017 . Does temporomandibular joint pathology with or without surgical management affect the stability of counterclockwise rotation of the maxillomandibular complex in orthognathic surgery? A systematic review and meta-analysis. Journal of Oral and Maxillofacial Surgery , 75 ( 4 ), 805 – 821 . Arif H, Ashraf R, Khan F, Khattak YR, Nisar H, Ahmad I. Total temporomandibular joint reconstruction prosthesis in hemifacial microsomia: A systematic review. Orthod Craniofac Res. 2024; 27: 15-26. doi:10.1111/ocr.12695
-
Recorded on May 21st, 2025 Description: Utilizing implant rehabilitation in treating patients with terminal dentition has been an optimal treatment modality in modern dental clinics with numerous scientific support. However, the most favorable survival/success outcome and longevity in such treatment remain challenging due to the complexity of which requiring intellectual knowledge and meticulous clinical execution. To begin with, the diagnosis, treatment plan, surgical intervention and fabrication of definitive prosthesis relies on comprehensive and fundamental prosthetic knowledge. Digital dental equipment, software and biomaterials were introduced in dentistry to reduce the pitfalls clinicians frequently encounter in the conventional world. Nevertheless, the integration of modern dental technologies providing top-quality end results of full mouth implant prosthesis will require understanding and in-depth knowledge for all perspectives. Upon completion of this presentation, participants should be able to: 1) Discuss interdisciplinary treatment planning workflow. 2) Navigate full digital implant protocols including the “NaviSmile Workflow”. 3) Explain the current limitations and latest invention of digital application for digital full arch definitive prosthesis. Selene Kuo, DDS, MS Dr. Selene (Hsin Yu) Kuo received her dual degrees in prosthodontics from Kaohsiung Medical University College of Dentistry (Taiwan) and Columbia University College of Dental Medicine (New York, USA). She then continued her academic appointment as clinical assistant professor in New York University College of Dentistry, Columbia University College of Dental Medicine, and Taipei Medical University College of Dentistry. With her profound prosthodontic-implant knowledge and clinical experience, her vision in digital implant dentistry drives her developed the innovative digital workflow “NaviSmile” featuring full mouth implant rehabilitation. “NaviSmile” workflow which incorporates the “era-breaking” dental navigation machine along with dental CAD/CAM equipment and software which precisely brings back patients’ health and smile. Dr. Kuo devotes herself in academia published numerous publications related to digital dentistry and has been lectured nationally/internationally. She also runs her private practice in Taipei City focusing on digital prosthodontics and dental implants. Dr. Kuo has stated she has no relevant financial conflicts to disclose. Relevant literature for further information: Martins J, Rangel J, de Araújo Nobre M, Ferro A, Nunes M, Almeida R, Moura Guedes C. A New Full Digital Workflow for Fixed Prosthetic Rehabilitation of Full-Arch Edentulism Using the All-on-4 Concept. Medicina (Kaunas). 2024 Apr 26;60(5):720. doi: 10.3390/medicina60050720. PMID: 38792903; PMCID: PMC11123051. Shuo Yao, Xiaojuan Yang, Xiaohui Han, Yanning Xue, Lingyun He, Dong Fang, LianPin Yu, Yali Hou, Shengyun Huang Immediate full-arch rehabilitation of edentulous jaws on 4 or 6 implants using a photogrammetry system: A retrospective study up to 2 years of follow-up, Journal of Stomatology, Oral and Maxillofacial Surgery, 2024, 102202, ISSN 2468-7855, https://doi.org/10.1016/j.jormas.2024.102202. (https://www.sciencedirect.com/science/article/pii/S2468785524004919) Serri, M., Ruggiero, G., Serri, M., Mastrosimone, A., Zarone, F., & Sorrentino, R. (2024). A fully-digital rehabilitation for immediately loaded fixed in-terim complete-arch prosthesis: A case report. Journal of Osseointegration, 16(3), 8–14. https://doi.org/10.23805/JO.2024.661 -
Recorded on May 13th, 2025 Description: This lecture explores the current state of occlusal management within prosthodontics, highlighting advancements in digital workflows, including the integration of intraoral scanning, computer-aided design and manufacturing (CAD/CAM), jaw tracking motion devices and virtual articulation systems. We will discuss how and when these tools enhance or do not enhance the accuracy of diagnosing occlusal relationships and the fabrication of prosthetic devices, ultimately leading to improved functional and aesthetic outcomes for patients. Furthermore, the role of digital occlusal analysis software in assessing and fine-tuning occlusal contacts for optimal performance and comfort will be addressed. This session is relevant for all clinicians who wish to enhance their knowledge in occlusion management in an increasingly digital world. Upon completion of this presentation, participants should be able to: 1) Identify the essential steps to digitalize the clinical data collection of the patient during the diagnostic phase. 2) Explain the digital procedures for aligning files that contain clinical data and the clinical procedures for executing complex prosthetic rehabilitation cases. 3) Discuss the advantages and disadvantages of the reported procedures. Luca Lepidi, DDS, MS Dr. Lepidi graduated from the University of Rome La Sapienza in 2001 (cum laude) and completed Master of Science in Oral Surgery in University of Rome, Tor Vergata. He attended the post-graduate program in Oral Implantology at the University of Chieti and in Gnatology at the University of Milano, Italy. Since then, he has worked intensively in the field of implant prosthodontics and digital dentistry. He also served as a part-time faculty member in prosthodontics, Department of Clinical and Experimental Medicine, University of Foggia Dental School, in Italy since 2011. Dr. Lepidi is Adjunct Professor at the University of Ferrara since 2022 and involved in multiple research projects in the areas of prosthodontics therapy and digital dentistry and is a senior lecturer at several University in Italy and in USA in post-graduate programs. He is an author and co-author of peer reviewed publications and serves as reviewer for multiple journals with high impact factor covering Prosthodontics and Digital Dentistry. Dr. Lepidi has indicated he has no relevant financial relationships to disclose. Relevant literature for further information: The 4D virtual patient: A proof of concept in digital dentistry Lepidi, Luca et al. The Journal of Prosthetic Dentistry, Published online April 13, 2024 Lepidi L, Suriano C, Wang HL, Granata S, Joda T, Li J. Digital fixed complete-arch rehabilitation: From virtual articulator mounting to clinical delivery. J Prosthet Dent. 2022 Mar;127(3):398-403. doi: 10.1016/j.prosdent.2020.08.049. Epub 2020 Dec 13. PMID: 33317830. -
Recorded on May 20th, 2025 Description: This presentation explores the expanding role of 3D printing technology in implant prosthetic dentistry, highlighting its impact on clinical workflows and treatment outcomes. Attendees will gain insight into how additive manufacturing is applied to the fabrication of surgical guides and various temporary/definitive prostheses, from crowns to complete-arch frameworks. The talk will include current trends, clinical applications, and patient treatment examples demonstrating the benefits of 3D printing in enhancing precision, efficiency, and patient-specific care. Participants will also learn to differentiate between various types of 3D printers and their suitability for specific prosthodontic applications. In addition, the presentation will guide the selection of appropriate resins used in printing implant-supported restorations. Upon completion of this presentation, participants should be able to: 1) Discuss the extent of use of 3D printers in implant prosthetic dentistry. 2) Identify the types of printers suitable for implant prosthodontics. 3) Select the appropriate type of resins that can be used for 3D printed implant restorations. Burak Yilmaz, DDS, PhD Dr. Burak Yilmaz received his dental and PhD degrees from the Ankara University and his subsequent academic titles at The Ohio State University, College of Dentistry. He was promoted to the rank of Associate Professor with tenure in 2014, and to the rank of Full Professor in 2019. He was involved in teaching dental and postdoctoral students and performing research, while practicing in the Dental Faculty Practice during his time at The Ohio State University. In September 2020, he became the Director of the Digital Dental Technologies Research Laboratory at the University of Bern School of Dental Medicine. He is also an Adjunct Professor at The Ohio State University. He holds a special interest in implant prosthodontics and digital dentistry and published more than 340 research studies and clinical reports. He is the co-author of the Implants Chapter in 5th and 6th editions of “Contemporary Fixed Prosthodontics” textbook by Rosenstiel et al. He serves as the Associate Editor of the Journal of Prosthodontics, is a member of the Editorial Board of the Journal of Prosthetic Dentistry and the Journal of Dentistry, Digital Dentistry Section, and serves on the AO/OF Research Committee for the Academy of Osseointegration. Dr. Yilmaz has indicated the following relevant financial relationships to disclose: Spoken at Meetings: Neoss Implants, Straumann, Kaladent, Received honoraria: Neoss Implants, Saremco, Dentbird, Kaladent Employed by/provided consulting for: Dentbird Performed research sponsored by: DWS/Dfab, Neoss Implants Relevant literature for further information: Çakmak G, Cuellar AR, Donmez MB, Schimmel M, Abou-Ayash S, Lu W-E, Yilmaz B. Effect of Printing Layer Thickness on the Trueness and Margin Quality of 3D-Printed Interim Dental Crowns. Applied Sciences. 2021; 11(19):9246. https://doi.org/10.3390/app11199246 Sabatini GP, Yoon HI, Orgev A, Fonseca M, Molinero-Mourelle P, Yilmaz B, Cakmak G. Complete Digital Workflow for Fabricating an Occlusal Device Using Artificial Intelligence- Powered Design Software and Additive Manufacturing: A Dental Method. Int J Prosthodont. 2024 Feb 21;37(7):275-284. doi: 10.11607/ijp.8941. PMID: 38787592. -
Recorded on September 16th, 2025 Description: A focus of this course will be on using lasers for management of mucogingival complex around implants during active implant treatment or implant maintenance phase. Upon completion of this presentation, participants should be able to: 1) Identify laser type (wavelengths) that may be beneficial for your dental implant practice. 2) Discuss laser applications in implant surgery, and for management of peri-implantitis. 3) Explain how laser applications could be beneficial in management of the mucogingival complex around implants during active phase of implant treatment or as part of implant maintenance. Mehrdad Favagehi, DDS, MS Dr. Mehrdad Favagehi is a Fellow of the Academy of Osseointegration. He maintains a private practice in a Northern Virginia suburb of the Washington, DC. He received his DDS from the Virginia Commonwealth University (VCU) School of Dentistry where he has served as part-time instructor since 1998 and for which he received a Teaching & Mentorship award from the American Academy of Periodontology (AAP) in 2011. Dr. Favagehi was a course co-director of VCU Laser Symposia. He has authored a book chapter about using lasers in periodontics (Chapter 4, Principles and Practice of Laser Dentistry, 3rd Edition, Elsevier, 2023). He has extensive experience with different laser wavelengths and has given many laser presentations at different conferences including AAP, AO and Academy of Laser Dentistry annual meetings. Dr. Favagehi is the Editor-in-Chief of the Academy of Osseointegration newsletter and the current President of the Osseointegration Foundation. Dr. Favagehi has indicated the following financial relationships: Zimvie, Implant Direct, Deka Laser – speaker, received honoraria This lecture will present off-label use: Use of different lasers in management of the mucogingival complex around implants. Dr. Favagehi has indicated the following financial relationships: Zimvie, Implant Direct, Deka Laser – speaker, received honoraria This lecture will present off-label use: Use of different lasers in management of the mucogingival complex around implants. Relevant literature for further information: American Academy of Periodontology best evidence consensus statement on the efficacy of laser therapy used alone or as an adjunct to non-surgical and surgical treatment of periodontitis and peri-implant diseases Michael P. Mills, Paul S. Rosen, Leandro Chambrone, Henry Greenwell, Richard T. Kao, Perry R. Klokkevold, Bradley S. McAllister, Mark A. Reynolds, Georgios E. Romanos, Hom-Lay Wang Wang HL, Avila-Ortiz G, Monje A, Kumar P, Calatrava J, Aghaloo T, Barootchi S, Fiorellini JP, Galarraga-Vinueza ME, Kan J, Lin GH, Ravida A, Saleh MHA, Tavelli L; AO/AAP Consensus Participants; Rosen PS. AO/AAP consensus on prevention and management of peri-implant diseases and conditions: Summary report. J Periodontol. 2025 Jun;96(6):519-541. doi: 10.1002/JPER.25-0270. Epub 2025 Jun 12. PMID: 40501397; PMCID: PMC12273748. Ravidà A, Dias DR, Lemke R, Rosen PS, Bertolini MM. Efficacy of Decontamination Methods for Biofilm Removal from Dental Implant Surfaces and Reosseointegration: An AAP/AO Systematic Review on Peri-implant Diseases and Conditions. Int J Oral Maxillofac Implants. 2025 Jun 6;(4):91-160. PMID: 40476898. -
Join us on October 22nd, 2025 Description: Crestal sinus lift is a surgical procedure used to increase bone volume in the posterior region of the upper jaw, making it possible to place dental implants. However, this technique can involve several potential complications, both intraoperative and postoperative. The most common complication during the procedure is perforation of the sinus membrane, which can lead to graft material dispersing into the sinus cavity, significantly increasing the risk of infection. In the postoperative period, patients may experience infections, sinusitis, and complications related to graft integration, such as resorption or failure of the graft material to integrate. Upon completion of this presentation, participants should be able to: 1) Identify intraoperative and postoperative complications associated with the crestal sinus lift technique, including their incidence and clinical implications. 2) Explain the pathophysiology and clinical consequences of sinus membrane perforation. 3) Discuss evidence-based protocols for the prevention and management of crestal sinus lift complications. Claudio Stacchi, DDS, MSc Dr. Stacchi graduated with his degree in Dentistry (DDS) and specialized in Oral Surgery (MSc) at the University of Trieste (Italy). He has served as an Adjunct professor in Oral Implantology since 2007 at the School of Dentistry and at the Post-Graduate Program in Oral Surgery at the University of Trieste. Since 2022 he achieved the National Scientific Qualification (ASN) as Full Professor. He has authored around 100 articles on impacted international journals. His professional practice is limited to Periodontology and Implantology at the Dental Clinic of the University of Trieste (Italy) and at his private office in Gorizia (Italy). Dr. Favagehi has indicated the following financial relationships: Zimvie, Implant Direct, Deka Laser – speaker, received honoraria This lecture will present off-label use: Use of different lasers in management of the mucogingival complex around implants. Dr. Lepidi has indicated the following financial relationships: Resista, Megagen, Mectron, Tecnoss – speaker, received honoraria Resista – performed research Relevant literature for further information: Classification of Sinus Membrane Perforations Occurring During Transcrestal Sinus Floor Elevation and Related Treatment. Tavelli L, Borgonovo AE, Saleh MH, Ravidà A, Chan HL, Wang HL. Int J Periodontics Restorative Dent. 2020;40(1):111-118. doi: 10.11607/prd.3602. Prevention and management of intra-operative complications in maxillary sinus augmentation: A review. Valentini P, Stacchi C. Clin Implant Dent Relat Res. 2025;27(1):e13397. doi: 10.1111/cid.13397. Intraoperative complications and early implant failure after transcrestal sinus floor elevation with residual bone height ≤5 mm: A retrospective multicenter study. Stacchi C, Bernardello F, Spinato S, Mura R, Perelli M, Lombardi T, Troiano G, Canullo L. Clin Oral Implants Res. 2022;33(8):783-791. doi: 10.1111/clr.13959. -
Previously recorded Description: Achieving long-term success in complex restorative dentistry requires a foundation of periodontal health. This presentation will review the critical synergy between prosthodontics and periodontics, demonstrating how interdisciplinary collaboration is essential for functional and aesthetic results. Using clinical case examples, will be illustrated the management of challenging scenarios, including anterior implant restorations and the sequencing of surgical and restorative interventions. Attendees will review how to optimize communication between specialists to manage biologic principles and stable results. Upon completion of this presentation, participants should be able to: 1) Identify key risk factors that need an interdisciplinary perio-prosthetic treatment plan. 2) Explain the rationale of treatment sequencing for complex cases. 3) Describe clinical techniques for managing the soft-tissue-prosthetic interface. Alvaro Blasi, DDS, CDT, PhD Alvaro Blasi, DDS, CDT, is an American Board-Certified Prosthodontist and a Certified Dental Technician. He graduated from the prosthodontics program at Augusta University. He was selected for a 1-year Esthetic and Implant Fellowship at the Goldstein Center at Augusta University. He received his dental degree from the International University of Catalonia in Barcelona, Spain. He is an Adjunct Assistant Professor at Augusta University Dental College of Georgia in the Oral Rehabilitation Department and Faculty at the International University of Catalonia in Barcelona, Spain. He is editor in chief of Quintessence tecnica dental journal. He has published several articles in international journals on topics of interdisciplinary treatments, esthetics and implants. Dr. Blasi lectures at a national and international level in the field of Prosthodontics. His main areas of interest are perio-ortho-pros treatments, esthetics and occlusion and implant restorations. He maintains a private practice in Barcelona Spain, at Blasi Clinic. Gonzalo Blasi-Beriain, DDS, MS, PhD Dr. Gonzalo Blasi is a diplomate of the American Board of Periodontology. He graduated from dental school at the International University of Catalonia and later earned a Ph.D. from the same institution in 2024. He expanded his expertise by obtaining a certificate in periodontology and implant dentistry, along with a Master of Science in oral biology, from the University of Maryland Baltimore School of Dentistry. Continuing his postgraduate education at UMB, Dr. Blasi completed a Fellowship in the Implant Prosthodontics Program. His academic excellence was recognized in 2016 when he received the prestigious Richard Lazzara Fellowship Award from the American Academy of Periodontology Foundation. Currently, Dr. Blasi serves as a visiting professor in the Department of Periodontics at UMB and as a program co-director at UIC. He also maintains a private practice in Barcelona at BLASI Dental Clinic. Dr. Blasi has disclosed the following financial relationships: Speaker, Honoraria - BioHorizons Relevant literature for further information: Ricardo Palacios-Bañuelos, María José Zilleruelo-Pozo, Ludovica Oreglia, Lory Abrahamian, Alvaro Blasi, Prosthetic and soft tissue considerations around anterior maxillary implants, Dentistry Review, Volume 4, Issue 2. -
Join us on April 21st, 2026 Description: This presentation will explore the most reliable etiological factors of Inferior Alveolar Nerve (IAN) injury, such as IAN iatrogenic injury during local anesthesia, associated with dental implantology and anatomical traps. Diagnostic methods of IAN sensory function assessment and nerve injury management will be discussed along with diagnostic and treatment protocol. This presentation will focus on the most common etiological factors of IAN trauma: iatrogenic injury to the IAN during local anesthesia, dental implant-related injury, and anatomical traps. Diagnostic methods for assessing IAN sensory function and managing nerve injury will be discussed. The IANIDIS diagnostic and treatment protocol will be presented. Upon completion of this presentation, participants should be able to: 1) Identify etiological and risk factors for IAN injury. 2) Describe diagnostic methods for assessing IAN sensory function. 3) Explain how to manage an IAN injury. Gintaras Juodžbalys DDS, MS, PhD Gintaras Juodzbalys, DMD, MS, PhD, graduated from Kaunas University of Medicine in 1983. He is a general dentist and oral surgeon with a private practice in Kaunas, Lithuania. At the University of Kaunas, he served as an Associate Profess and Professor from 2006. He is currently is a Professor at the Department of Maxillofacial Surgery at the Lithuanian University of Health Sciences. He was as founder and chair of international scientific project “Baltic Compass”. Past President of Baltic Osseointegration Academy; head of Dental Implant Centre “Stilus Optimus”; member of Editorial staff of scientific journal “Stomatologija - Baltic Dental and Maxillofacial Journal”; founder and Editor-in-Chief of Journal of Oral & Maxillofacial Research. He is Chairman of Faculty Council and member of Scientific Board of Odontology at Lithuanian University of Health Sciences. He has been lecturing in 84 national/international scientific meetings as an invited or keynote speaker, has published 177 publications. His research interests primarily focus on oral implantology and tissue engineering. He is an active organizer of dental implantology specialty development in Baltic Countries. Dr. Juodžbalys has indicated he has no relevant financial information to disclose. Relevant literature for further information: Kämmerer PW, Heimes D, Hartmann A, Kesting M, Khoury F, Schiegnitz E, Thiem DGE, Wiltfang J, Al-Nawas B, Kämmerer W. Clinical insights into traumatic injury of the inferior alveolar and lingual nerves: a comprehensive approach from diagnosis to therapeutic interventions. Clin Oral Investig. 2024 Mar 15;28(4):216. doi: 10.1007/s00784-024-05615-4. PMID: 38488908; PMCID: PMC10942925. Han J, Han JJ. Risk factors for inferior alveolar nerve injury associated with implant surgery: An observational study. J Dent Sci. 2025 Jan;20(1):270-277. doi: 10.1016/j.jds.2024.07.025. Epub 2024 Aug 8. PMID: 39873043; PMCID: PMC11762662. Shavit I, Juodzbalys G. Inferior alveolar nerve injuries following implant placement - importance of early diagnosis and treatment: a systematic review. J Oral Maxillofac Res. 2014 Dec 29;5(4):e2. doi: 10.5037/jomr.2014.5402. PMID: 25635209; PMCID: PMC4306320. Juodzbalys G, Wang HL, Sabalys G, Sidlauskas A, Galindo-Moreno P. Inferior alveolar nerve injury associated with implant surgery. Clin Oral Implants Res. 2013 Feb;24(2):183-90. doi: 10.1111/j.1600-0501.2011.02314.x. Epub 2011 Nov 1. PMID: 22092662. Sarikov R, Juodzbalys G. Inferior alveolar nerve injury after mandibular third molar extraction: a literature review. J Oral Maxillofac Res. 2014 Dec 29;5(4):e1. doi: 10.5037/jomr.2014.5401. PMID: 25635208; PMCID: PMC4306319.HTML Button Generator -
Recorded on April 8th, 2026 Description: Managing alveolar bone defects remains a complex therapeutic challenge. Bone graft surgery often has high rates of reintervention, leading to increased healthcare costs. Despite progress in technical and clinical aspects over recent years, various factors such as the patient's age, comorbidities, systemic illnesses, defect location, and the surgeon's experience can affect clinical outcomes. Over the past 20 years, there has been a major advance in three-dimensional (3D) printing. This innovative technology allows for creating final parts directly from 3D model data through a layer-by-layer process. It has significantly impacted bone defect treatment by enabling the production of custom therapies with highly porous, 3D-printed implants specifically designed for each patient's needs. The main goal of this conference is to showcase significant progress in developing bone scaffolds through additive manufacturing methods. These scaffolds are essential in offering environmentally sustainable solutions for various medical and dental applications. Specifically, the treatment of alveolar ridge deficiency with 3 to 4 years of follow-up will be presented and discussed based on the current knowledge and limitations of bone graft reconstructions. Upon completion of this presentation, participants should be able to: 1) Identify explicit methods of treatment planning and coordination between team members. 2) Select and design prostheses for complex treatment scenarios. 3) Discuss tangible methods of communication and involvement with the dental laboratory. Jamil Shibli, DDS, MS, PhD Jamil Shibli is a Professor in the Faculty of Dentistry and serves as the Director of the Department of Periodontology and Oral Implantology at the Dental Research Division of Guarulhos University and Faculdades Israelitas Albert Einstein in Sao Paulo, Brazil. Professor Shibli's research focuses on evaluating therapeutics for peri-implant infections and regenerating atrophic jaws with tissue engineering / 3-D printing technology. Dr. Shibli conducts transdisciplinary randomized clinical trials in collaboration with expert teams from local and international backgrounds. He is the author of numerous book chapters, and his manuscripts have been published in peer-reviewed dentistry and medical publications. Dr. Shibli has indicated the following relevant financial information to disclose: Plenum Bioengenharia: received honorarium, employed/consulted, speaker, performed research ITI Straumann: performed research Relevant literature for further information: Ivanovski S, Staples R, Arora H, Vaquette C, Alayan J. Alveolar bone regeneration using a 3D-printed patient-specific resorbable scaffold for dental implant placement: A case report. Clin Oral Implants Res. 2024 Dec;35(12):1655-1668. doi: 10.1111/clr.14340. Epub 2024 Aug 7. Shibli JA, Nagay BE, Suárez LJ, Urdániga Hung C, Bertolini M, Barão VAR, Souza JGS. Bone Tissue Engineering Using Osteogenic Cells: From the Bench to the Clinical Application. Tissue Eng Part C Methods. 2022 May;28(5):179-192. doi: 10.1089/ten.TEC.2022.0021. Latimer JM, Maekawa S, Yao Y, Wu DT, Chen M, Giannobile WV. Regenerative Medicine Technologies to Treat Dental, Oral, and Craniofacial Defects. Front Bioeng Biotechnol. 2021 Aug 6;9:704048. doi: 10.3389/fbioe.2021.704048.
